Hotspot Legend
-
Power & Performance
-
Operator Assistance
-
Cost of Ownership
-
Ergonomics & Controls
** The product shown may be different than the actual configuration based on market requirements and/or customer specifications.
*** Some products may be shown with optional equipment. Actual equipment features may vary.
Delivers unbeatably agile maneuvering, better traction, and longer tire life. These trucks utilize a 4 wheel steering system that makes instant side turns possible. Some features of this system are:
- 100° rear axle rotation
- Front drive wheels rotate in opposite direction
- Ability to turn within its own footprint
The parking brake engages automatically once the trucks comes to a stop after the accelerator pedal is released. This feature prevents roll back on ramps.
The parking brake disengages when the accelerator pedal is activated. If on a ramp, the parking only disengages when enough torque is available to start moving the truck which prevents the risk of roll back.
Removes the need for traditional pedals, levers, or buttons to activate parking brake.
This feature locks out the front wheels to increase traction on slippery surfaces and is activated automatically at small steering angles or manually via an optional foot-operated toggle switch.
The dual pedals remove the need for the operator to pause and manually change drive direction. The left and right pedals are the accelerator pedals for forward and reverse while the middle pedal is the brake pedal.
Using the accelerator pedals, the operator can switch drive direction by pressing the alternate pedal. When one pedal is depressed the other rises, preventing the operator from accidentally damaging the drive motor.
Truck automatically reduces travel speed when cornering,
depending on load speed and steering angle.
This helps to keep loads stable and
secure.
curveCONTROL significantly decreases the risk of overturning or slipping, thus providing operator assistance and ensuring optimum productivity.
- Optimizes visibility of loads, racking and obstacles, for more accurate truck and fork positioning
Responsive, ergonomically designed controls, clear all-round vision and an advanced all-wheel steering system enable maneuvering of the truck with minimal effort.
- Enables confident operation, even in tight spaces
- Reduces operator fatigue to help improve productivity
Electronic control feature that helps to lessen mast and carriage sway with any load lifted over 11.5 ft (3.5m).
When the control system engages this feature, the wheel brakes are opened temporarily, transferring mast sway energy to the chassis and dampening the sway at the load.
Allows operators to confidently handle raised loads moving in or out of racking.
Adaptive speed control adjusts truck performance modes in reaction to quickness of foot and fingertip movements. This allows the truck to meet a driver's changing needs and ensures smooth starts and stops.
Sensors constantly monitor the steering angle and speed of the truck.
Sensors constantly monitor the steering angle and speed of the truck. When tolerances are exceeded, the truck's control system automatically responds to reduce speed early in the maneuver.
This feature helps to reinforce safe driving habits. This can also increase operator confidence levels and productivity, as top turning speeds are automatically restricted.
The trucks are equipped with LED lights as standard equipment. The LED lights produce a bright light while emitting very little heat. Having no filaments, they also last longer than the traditional incandescent bulbs and are not affected by vibration.
These trucks use regenerative braking in normal driving and brake
pedal usage. Brake lights are controlled by the regen system.
The brake lights start to blink when regen is active and the truck is slowing down.
When the brake pedal is pressed, brake lights will be on constantly.
*Requires rear combination lights (option) for operation.
- Indicates work zone to pedestrians
- Increases awareness of truck operation in low light conditions
- Can be mounted on the side of OHG as needed
The blue spotlights are designed to notify pedestrians of the
truck's presence by projecting a blue spotlight on the ground.
Depending on the direction of travel, the lights will project in front of or behind
the truck, notifying pedestrians of its proximity.
The spotlights are mounted on the overhead guard, the forward-facing option shines
through the mast and the rearward facing option shines to the ground behind the
counterweight.
Provides a warning when the truck is reversing. The sound level adapts to the range of 82-102 dB and is encased in a dust and waterproof housing.